Tom's RC
Fast Shipping from California
$2.95 Continental USA Shipping
for your entire order
Now shipping to international locations!
Log In My Account Track Order Cart Contents Checkout

 
Advanced Search
Site Map
Home » Transmitters » TX Aircraft » Advanced » 10CGH-FFPB4
Futaba 10C Heli Integrated Tx 2.4GHz + Flight Pack R617FS 4x S3151
[10CGH-FFPB4][1]
$605.96
lower pricing avail

This is the Futaba 10CG Integrated 10-Channel Computer Radio for Planes, Helicopters, and Gliders. Check out the Instruction Manual HERE or HERE

The 2.4GHz system that offers the impossible: Pro-level features at a sport-system price. Some people feel that a 2.4GHz system with a built-in module will always offer better response than a modular system. Nothing could be further from the truth.

Converting a signal from analog to digital form requires processing time — what you experience as lag. The 10C, on the other hand, was designed with a totally digital data stream. The signal starts digital and stays digital. Since no additional processing is needed, there’s no lag, either — just virtually instantaneous, real-time response.

Packaged here with the Standard Flight Pack + BONUS USB RC Simulator Cable (type Square 6 + Data Cable).
 

       
                                                +                                       
     

Includes:
  • Transmitter
    • (1) Futaba 10CG Heli Integrated Mode 2 Transmitter w/ Battery (NT8S700B 700mAh NiCd)
    • (1) Instruction Manual + Warranty Card
    • (1) Charger FBC-19B4 for Tx & Rx
    • (1) Neck Strap
    • (1) USB RC Simulator w/ Software CD - Windows (XP, Vista,7)/Linux see here for more info
  • Flight Pack
    • (1) One Futaba R617FS FASST 2.4 GHz Receiver
    • (4) Futaba S3151 Digital Ball Bearing Servos with mounting hardware (screws, grommets, eyelets)
    • (1) Futaba Receiver Nicad Battery NR-4RB
    • (1) Futaba Switch Harness w Charge Cord
    • (1) Servo Tray with mounting hardware (screws & grommets)
    • (2) Bonus Heavy Duty Servo Extensions: 6 inch & 12 inch

FLIGHT PACK SPECIFICATIONS:

R617FS 2.4 GHz 7 Channel Receiver
  • High sensitivity receiver weighs only .25oz (7g) without case yet is a full range system for all aircraft from giant scale to park flyer applications-no need to buy separate receiver for specific aircraft
  • Simple one-touch binding - no plugs to mess with or lose
  • Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter to select the best reception between the two receiver antennas with no signal loss
  • Rubber grommets installed where antennas exit to eliminate stress and fraying of the two antenna wires
  • One year limited warranty
  • Size: 1.6 x 1.1 x .35" (40 x 27 x 9mm)
  • Power Requirement: 4.8 - 6V
  • Current Drain: 80mA (at no signal), 74 mA(w/ signal no servos on 4.8)
  • Weight: 0.34oz (9.8g) with case, 0.25oz (7g) without case
S3151 Servo
  • Speed: 0.21 sec/60 degrees at 4.8V
  • Torque: 43 oz-inches (3.1kg-cm) at 4.8V
  • Size: LxWxH (1.6x0.8x1.4) inches; (40.6x20x36)mm
  • Weight: 1.50 oz(42 grams)
  • Connector: 'J' type with approx. 12' wire

 

NR4RB Battery
  • Weight: 4.2oz (119g)
  • Length: 2.21" (56mm)
  • Width: 2.65" (67mm)
  • Height: 0.59" (15mm)
  • Ampere: 1000mAh
  • Volts: 4.8V

10CG System Overview:

  • Dial ‘n Key™ programming w/joystick
  • Airplane, heli and glider software
  • 2048 resolution
  • Real-Time Response™
  • Smarth Technology™
  • Basic & advanced m Switcenus
  • 15-model memory, expandable to 48 models*
  • 10-character model & user naming
  • Assignable switches & dials/functions
  • Model select, copy, re-set
  • Data transfer
  • 2 proportional slider switches
  • Fail-safe, sub-trims, servo reversing & EPA
  • Digital trims & trim step, expo & dual/triple rates
  • 160 x 72 backlit LCD w/adjustable contrast
  • Servo monitor display
  • Auxiliary channel screen for 1-step function/switch assignment
  • Model & system timers
  • Full functionality trainer system (cord required)
  • Throttle cut, hold & idle down
  • Mode 1-4 selectable
  • Sticks w/length and tension adjustments
10C Specifics:
  • Advanced Airplane Menu
    • 8 Programmable Mixes
    • Elevator/Flap
    • Throttle needle
    • Aileron differential
    • Flaperons
    • V-tail
    • Elevon
    • Air brake w/elevator delay
    • Ailevator
    • 4-position snap roll switch
    • 2 independent gyro settings
    • 7-point throttle curve
    • Flap trim
  • Advanced Heli Menu
    • 6 Programmable Mixes
    • Hover/pitch
    • Hover throttle
    • 8 swash plate types w/graphics
    • Swash AFR
    • 5-point revo mixing
    • Gyro menu
    • 7-point throttle & pitch curves w/delay
    • High/low pitch setting
    • Swash ring
    • Throttle hold & 3 idle-ups w/delay
  • Advanced Glider Menu
    • 8 Programmable Mixes
    • Butterfly-Elevator (2)
    • Elevator-Flap
    • Chamber mix
    • Aileron/flap
    • Aileron/rudder
    • Flaperons
    • V-tail
    • 4-point offset
    • Spoiler mix
    • Single/dual flap servos
    • 5 flight conditions
    • 3 wing types
    • Adjustable motor cut

This product was added to our catalog on Wednesday 03 June, 2009.
Shopping Cart 1
0 items
Edit Cart | Checkout
Hitec Aurora 9 +2.4GHz Module

Aurora 2.4 TX Only
Aurora 2.4 +Optima 7
Aurora 2.4 +Optima 9
Aurora+Optima9+4Svo
Manufacturer Info
Futaba
Futaba Homepage
Other products
Notifications
NotificationsNotify me of updates to Futaba 10C Heli Integrated Tx 2.4GHz + Flight Pack R617FS 4x S3151
Tell a friend
 
Tell someone you know about this product.
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Support
Links
Manuals
Site Map
Contact Us
Copyright © 2004-2010 Tom's RC